Maintenance Guide

Paint Protection Film (PPF) Care

Proper Care Tips

• Wait 72 hours after installation before washing your car
• Use pH-neutral soap such as XPEL Wash Solution and a wash mitt
• Dry with a high-quality microfiber towel to prevent water spots

The Do’s and Don’ts

• Promptly remove insects, tar, bird droppings and tree sap
• Use XPEL Film Cleaner or Si02 Waterless Wash when possible
• Seal film with XPEL Ceramic Boost
• Don’t use abrasive materials or harsh chemicals on the film
• Don’t use high-pressure washers near the edges of the film
• Don’t use waxes that contain Naphtha or Kerosene in concentrations over 5%
• Don’t use waxes that contain dyes
• Don’t use non XPEL ceramic coatings or ceramic spray products on the PPF

Additional Tips:

• Superficial scratches in the film will self-heal in 20-30 minutes at room temperature
• In colder conditions, or to accelerate the process, pour warm water over the affected area

Warranty Information:

• Coverage: XPEL ULTIMATE PLUS PPF is backed by a 10-year nationwide transferable warranty against defects such as yellowing, cracking, blistering, and delaminating. Visit www.xpel.com/warranty-information for more information.

Window Tint Care

Proper Care Tips

• Wait 3-5 days after installation before rolling down or cleaning your windows
• Clean windows with a soft microfiber towel, slightly dampen towel with water or a mild, non-ammonia glass cleaner such as XPEL Glass Cleaner

Do’s and Don’ts

• Use gentle, non-abrasive materials for cleaning
• Wait 5 days before reattaching dash cameras or EZ passes
• Don’t use abrasive materials such as scouring pads, which can scratch the tint
• Don’t use ammonia-based cleaners, as they can damage the tint.

Additional Tips

• It’s normal for window tint to appear hazy or have moisture bubbles
• Two weeks after installation, bubbles and haziness will disappear as the moisture dries
• Tint can be scratched by sharp objects (ex. children’s toys or nails from pets)

Warranty Information

• Coverage: XPEL PRIME Automotive Window Films carry a lifetime nationwide transferable warranty against discoloration, fading, bubbling, peeling, cracking, and delamination. Visit www.xpel.com/warranty-information for more information.

Windshield Protection Film Care

Initial Care

• Avoid washing your vehicle for at least 72 hours post-installation to allow the film to cure
• Replace windshield wiper blades with a premium set to prevent scratches or damage

Regular Cleaning

• Hand wash using XPEL Wash Solution or foam soap with a microfiber mitt
• Rinse thoroughly and dry with a clean microfiber towel to prevent water spots.
• Avoid air drying in direct sunlight
• For contaminants like bird droppings or bug splatter, use warm water and pH-neutral soap, or apply XPEL SiO₂ Waterless Wash for quick removal
• Use a 50/50 mix of water and isopropyl alcohol for contaminants like tree sap or tar
• Spray onto a microfiber towel and gently clean the area

Winter Care

• Avoid sharp tools or scrapers for snow and ice removal

Maintenance Products

• Use the XPEL TPU Windshield Protection Film Maintenance Kit (sold separately) for waterless washing, water spot removal, and glass cleaning
• Apply XPEL WPF Restore at the 6-month mark to maintain hydrophobic properties and enhance performance

Warranty Information

• Coverage: XPEL Windshield Film carries a nationwide transferable 1 year or 12,000 miles (whichever occurs first) warranty against yellowing, cracking, blistering, and delaminating. Visit www.xpel.com/warranty-information for more information.